What is a High temperature bright deep well furnace? Introduction to the principle of Forging furnace structure

High temperature bright deep well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，the product looks beautiful.，widely used in war industry, building materials, light industry, automobile, Household necessities and other fields，Widely used in Metal heat treatment, Metal forging heating, Metal melting and casting, Metal tempering and Metal melting and casting。The following is to introduce the High temperature bright deep well furnace:

1、Brief introduction of High temperature bright deep well furnace

High temperature bright deep well furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a popular High temperature bright deep well furnace，energy saving and environmental protection,Easy to maintain,Stable and reliable,Easy to control,Strong adaptability，be of high quality，favorable price。

High temperature bright deep well furnace

2、High temperature bright deep well furnace function

High temperature bright deep well furnaceit has the functions of heat treatment, temper, normalizing, anneal and quench，Commonly used inMetal heat treatment,Metal tempering,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating and so on。

High temperature bright deep well furnace

3、High temperature bright deep well furnace HD picture

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

High temperature bright deep well furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of advantages of High temperature bright deep well furnace

High temperature bright deep well furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the High temperature bright deep well furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Intelligent control

The High temperature bright deep well furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Efficient combustion

The High temperature bright deep well furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Extend the service life of equipment

The High temperature bright deep well furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

High temperature bright deep well furnace

5、High temperature bright deep well furnace application

High temperature bright deep well furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, High temperature bright deep well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The High temperature bright deep well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the High temperature bright deep well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature bright deep well furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Improve production efficiency

The High temperature bright deep well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

High temperature bright deep well furnace

6、High temperature bright deep well furnace price concessions

The High temperature bright deep well furnace price is introduced as follows:

1. Company size

Our company's expected profit value of High temperature bright deep well furnace is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of High temperature bright deep well furnace is relatively low.

2. Self quality

Quality is an important and fundamental factor that affects the price of High temperature bright deep well furnace. In the final analysis, its price depends on its quality. Usually, High temperature bright deep well furnace with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A High temperature bright deep well furnace with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

3. Proper management mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. market demand

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the High temperature bright deep well furnace market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

5. manufacturing cost

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the High temperature bright deep well furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

High temperature bright deep well furnace

High temperature bright deep well furnaceit is mainly composed of Radiation chamber, combustor, furnace chamber, recovery of waste heat and convection chamber，High temperature bright deep well furnaceThe structure is novel, special, advanced, reasonable and scientific.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，is a kind of high quality and low price High temperature bright deep well furnace。