What is a Intelligent trolley furnace? Forging furnace specifications, models, and parameters

Intelligent trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks atmospheric.。

1、Brief introduction of Intelligent trolley furnace

Intelligent trolley furnaceIt is a forging heating device using gas as fuel.。

Intelligent trolley furnace

2、Introduction of Intelligent trolley furnace characteristics

Intelligent trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Intelligent trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Intelligent trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Intelligent trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Intelligent trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Intelligent trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Intelligent trolley furnace

3、Working principle of Intelligent trolley furnace

Intelligent trolley furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，multifunctional, with functions such as Casting heating, heat treatment, hardening and tempering, anneal and normalizing。

Intelligent trolley furnace

4、On-site real shot of Intelligent trolley furnace

High-definition pictures of reliable Intelligent trolley furnace at a glance。

Intelligent trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Structural advantages of Intelligent trolley furnace

The Intelligent trolley furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Radiation chamber

The heat load of the main place for Intelligent trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Intelligent trolley furnace

6、Intelligent trolley furnace price

The Intelligent trolley furnace price is introduced as follows:

1. sales mode

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

2. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Intelligent trolley furnace have more or less differences in price.

4. company strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

5. select a qualified person

The quality of material selection is one of the main factors that directly affect the Intelligent trolley furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

Intelligent trolley furnace

Intelligent trolley furnaceMainly used forEnergy conservation and environmental protection,Metal melting and casting,Metal heat treatment,Metal forging heating andEnergy conservation and environmental protection，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。