What is a Segmented trolley forging heating furnace? Introduction to the principle of Forging furnace structure

Segmented trolley forging heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，has been favored by more and more customers.。The following is to introduce the Segmented trolley forging heating furnace:

1、Brief introduction of Segmented trolley forging heating furnace

Segmented trolley forging heating furnaceIt is a forging heating device using gas as fuel.，is a popular Segmented trolley forging heating furnace，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Segmented trolley forging heating furnace

2、Introduction of Segmented trolley forging heating furnace characteristics

Segmented trolley forging heating furnace has the following characteristics

1. Efficient heating

The Segmented trolley forging heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to maintain

The structural design of the Segmented trolley forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Segmented trolley forging heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Segmented trolley forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Segmented trolley forging heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Segmented trolley forging heating furnace

3、Segmented trolley forging heating furnace principle

Segmented trolley forging heating furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Segmented trolley forging heating furnace

4、Segmented trolley forging heating furnace structure

The Segmented trolley forging heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Segmented trolley forging heating furnace

5、Segmented trolley forging heating furnace use

The purpose of Segmented trolley forging heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Segmented trolley forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Energy conservation and environmental protection

The Segmented trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Energy conservation and environmental protection

The Segmented trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Segmented trolley forging heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Segmented trolley forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Segmented trolley forging heating furnace

6、Segmented trolley forging heating furnace quotation

The Segmented trolley forging heating furnace price is introduced as follows:

1. Configuration level

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

2. region

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving detailed address:Zhangqiu Niu Yi Industrial Park, Ji 'nan City, Shandong Province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

3. Brand strength

At present, there are various brands of Segmented trolley forging heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Segmented trolley forging heating furnace are different.

4. specifications and models

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Segmented trolley forging heating furnace, which have different models and different performances. Therefore, these are all factors that affect the price change of Segmented trolley forging heating furnace.

5. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

Segmented trolley forging heating furnace

Segmented trolley forging heating furnaceAdopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，Commonly used inMetal melting and casting,Metal heat treatment,Metal melting and casting,Metal heat treatment,Improve production efficiency and so on，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。