What is a Dual car calcination furnace? How much is the price of the heating furnace?

Dual car calcination furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is usually composed of Radiation chamber, furnace chamber, combustor, ventilation system and ventilation system，This Dual car calcination furnaceThe overall structural design is simple and novel.，is an advanced Dual car calcination furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Dual car calcination furnace

Dual car calcination furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，multifunctional, with functions such as Forging heating, temper, Casting heating, heat treatment and normalizing，is developed and improved by One-combustion energy saving。

Dual car calcination furnace

2、Dual car calcination furnace customer scene picture

Dual car calcination furnace HD real shot, showing the product style.。

Dual car calcination furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Working principle of Dual car calcination furnace

Dual car calcination furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，support customization。

Dual car calcination furnace

4、Dual car calcination furnace application

Dual car calcination furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Dual car calcination furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Dual car calcination furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Dual car calcination furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Dual car calcination furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Dual car calcination furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Dual car calcination furnace

5、Introduction of advantages of Dual car calcination furnace

Dual car calcination furnaces have the following advantages.

1. easy to operate

The operation interface of the Dual car calcination furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Extend the service life of equipment

The Dual car calcination furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Improve product quality

Because the Dual car calcination furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Intelligent control

The Dual car calcination furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Dual car calcination furnace can significantly reduce energy consumption, thus reducing operating costs.

Dual car calcination furnace

6、How much is the Dual car calcination furnace?

The Dual car calcination furnace price is introduced as follows:

1. technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Dual car calcination furnace have more or less differences in price.

4. product configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Dual car calcination furnace has a higher cost performance.

5. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

Dual car calcination furnace

Dual car calcination furnacethe advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。