What is a Dual car carbonization furnace? Introduction to the advantages and characteristics of forging furnace functions

Dual car carbonization furnaceIt is a forging heating device using gas as fuel.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。The following is to introduce the Dual car carbonization furnace:

1、Brief introduction of Dual car carbonization furnace

Dual car carbonization furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Dual car carbonization furnace

2、Structural characteristics of Dual car carbonization furnace

The Dual car carbonization furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Radiation chamber

The heat load of the main place for Dual car carbonization furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Dual car carbonization furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Dual car carbonization furnace

3、Video analysis of Dual car carbonization furnace

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Dual car carbonization furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Dual car carbonization furnace

As you can see from the live video.，One-combustion energy saving it is mainly composed of ventilation system, ventilation system, furnace chamber, combustor and Radiation chamber，productThe structure is novel, special, advanced, reasonable and scientific.。

4、Advantages of Dual car carbonization furnace principle

Dual car carbonization furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it can be used in building materials, automobile, aerospace, petroleum, electron and other industries，has been favored by more and more customers.。

Dual car carbonization furnace

5、Dual car carbonization furnace characteristics

The Dual car carbonization furnace features are as follows:

1. Efficient heating

The Dual car carbonization furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Dual car carbonization furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Dual car carbonization furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Stable and reliable

The Dual car carbonization furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Dual car carbonization furnace

Dual car carbonization furnacefeatures include Strong adaptability, energy-efficient, energy saving and environmental protection, Stable and reliable and Easy to maintain，the product looks atmospheric.，it is widely used in light industry, pharmacy, chemical industry, metallurgy, shipping and other industries。