Introduction to Trolley type industrial tempering furnace, advantages, characteristics and principles of Forging furnace

Trolley type industrial tempering furnaceIt is a forging heating device using gas as fuel.，It has a wide range of uses, and is often used inMetal forging heating,Metal melting and casting,Energy conservation and environmental protection,Metal forging heating,Metal tempering and so on，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，it mainly includes ventilation system, furnace chamber, convection chamber, Radiation chamber and combustor，can be customized according to user's needs.。The following is to introduce the Trolley type industrial tempering furnace:

1、Brief introduction of Trolley type industrial tempering furnace

Trolley type industrial tempering furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.。

Trolley type industrial tempering furnace

2、Trolley type industrial tempering furnace structure composition

The Trolley type industrial tempering furnace has the following structure

1. Radiation chamber

The heat load of the main place for Trolley type industrial tempering furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Trolley type industrial tempering furnace

3、Video analysis of Trolley type industrial tempering furnace

You can buy Trolley type industrial tempering furnace according to your needs and show you product videos.。

Trolley type industrial tempering furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the main structure includes ventilation system, furnace chamber, ventilation system, Radiation chamber, convection chamber and so on。

4、Trolley type industrial tempering furnace application

Trolley type industrial tempering furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Trolley type industrial tempering furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Trolley type industrial tempering furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Trolley type industrial tempering furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley type industrial tempering furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Trolley type industrial tempering furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Trolley type industrial tempering furnace

5、Trolley type industrial tempering furnace price consultation

The Trolley type industrial tempering furnace price is introduced as follows:

1. Parameter size

The same equipment, even with different models and different configurations, has different investment costs, so the price will be different.

2. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

3. regional difference

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

4. Manufacturer's strength

Although there are many manufacturers of products in Jinan, Shandong province, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

5. Self quality

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

Trolley type industrial tempering furnace

6、Company discount

Trolley type industrial tempering furnace is a new type of Forging furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for pharmacy and other industries. Now consult One-combustion energy savingTrolley type industrial tempering furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Trolley type industrial tempering furnacethe product looks beautiful.，is a Trolley type industrial tempering furnace，it has the functions of Forging heating, heat treatment, Casting heating, quench and anneal。