Introduction to Energy saving and environmentally friendly tubular roaster and heating furnace structure principle

Energy saving and environmentally friendly tubular roasterIt is a forging heating device using gas as fuel.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。The following is to introduce the Energy saving and environmentally friendly tubular roaster:

1、Brief introduction of Energy saving and environmentally friendly tubular roaster

Energy saving and environmentally friendly tubular roasterIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，is a popular Energy saving and environmentally friendly tubular roaster。

Energy saving and environmentally friendly tubular roaster

2、Advantages of Energy saving and environmentally friendly tubular roaster principle

Energy saving and environmentally friendly tubular roasterat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the functions of Forging heating, Casting heating, heat treatment, hardening and tempering and normalizing，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It has the functions of Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal tempering and Metal heat treatment，can be customized according to user's needs.。

Energy saving and environmentally friendly tubular roaster

3、Energy saving and environmentally friendly tubular roaster video live broadcast

You can buy Energy saving and environmentally friendly tubular roaster according to your needs and show you product videos.。

Energy saving and environmentally friendly tubular roaster

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

4、Introduction of Energy saving and environmentally friendly tubular roaster characteristics

Energy saving and environmentally friendly tubular roaster has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to control

The combustion system and ventilation system of the Energy saving and environmentally friendly tubular roaster can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Stable and reliable

The Energy saving and environmentally friendly tubular roaster has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Stable and reliable

The Energy saving and environmentally friendly tubular roaster has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Energy saving and environmentally friendly tubular roaster

5、Structural advantages of Energy saving and environmentally friendly tubular roaster

The Energy saving and environmentally friendly tubular roaster has the following structure

1. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly tubular roaster heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly tubular roaster heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Energy saving and environmentally friendly tubular roaster

6、How much is the Energy saving and environmentally friendly tubular roaster?

The Energy saving and environmentally friendly tubular roaster price is introduced as follows:

1. Self quality

The selling price of excellent quality products is also high, so users should also consider the quality and price of products comprehensively when purchasing products, so as to buy products with high cost performance.

2. regional advantages

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving located in Jinan. has convenient transportation, which provides a good convenience for the transportation of Energy saving and environmentally friendly tubular roaster.

3. manufacturing cost

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Energy saving and environmentally friendly tubular roaster manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Energy saving and environmentally friendly tubular roaster price can meet the purchasing needs of customers.

5. specifications and models

Different models will have different specifications, which will lead to greater differences in the comprehensive configuration of products, which will also lead to greater changes in prices.

Energy saving and environmentally friendly tubular roaster

Energy saving and environmentally friendly tubular roasterat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a Energy saving and environmentally friendly tubular roaster，multifunctional, with functions such as Forging heating, anneal, temper, quench and normalizing。