Introduction to Normalizing natural gas trolley furnace, heating furnace advantages, characteristics and principles

Normalizing natural gas trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it mainly includes ventilation system, ventilation system, convection chamber, Radiation chamber and furnace chamber，Stable and reliable,Easy to control,Stable and reliable,energy-efficient,energy saving and environmental protection，Widely used in Metal forging heating, Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency and Metal forging heating，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.。The following is to introduce the Normalizing natural gas trolley furnace:

1、Brief introduction of Normalizing natural gas trolley furnace

Normalizing natural gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Normalizing natural gas trolley furnace，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.，it is an ideal choice for customers to buy Normalizing natural gas trolley furnace。

Normalizing natural gas trolley furnace

2、Normalizing natural gas trolley furnace structure composition

The Normalizing natural gas trolley furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Normalizing natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Normalizing natural gas trolley furnace

3、Normalizing natural gas trolley furnace field real shot

You can buy Normalizing natural gas trolley furnace according to your needs and show you product videos.。

Normalizing natural gas trolley furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The structural design is simple, novel and special.，Structure consists of recovery of waste heat, combustor, furnace chamber, ventilation system, combustor and so on。

4、Physical picture of Normalizing natural gas trolley furnace

The following pictures can be used for reference by new and old customers.。

Normalizing natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Normalizing natural gas trolley furnace characteristics

Normalizing natural gas trolley furnace has the following characteristics

1. Easy to maintain

The structural design of the Normalizing natural gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Normalizing natural gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Strong adaptability

The Normalizing natural gas trolley furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Normalizing natural gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Normalizing natural gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Normalizing natural gas trolley furnace

6、Normalizing natural gas trolley furnace advantage

The advantages of Normalizing natural gas trolley furnace are as follows:

1. Wide application range

The Normalizing natural gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Rapid temperature rise

The Normalizing natural gas trolley furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. Multiple fuel options

Although the Normalizing natural gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. easy to operate

The operation interface of the Normalizing natural gas trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Normalizing natural gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

Normalizing natural gas trolley furnace

Normalizing natural gas trolley furnacemultifunctional, with functions such as anneal, Forging heating, quench, Casting heating and heat treatment，the product looks atmospheric.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。