What is a Rotary tube annealing furnace? Introduction to the principle of Forging furnace structure

Rotary tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Widely used inMetal melting and casting,Improve production efficiency,Metal heat treatment,Metal heat treatment,Metal tempering and so on，has been favored by more and more customers.。

1、Brief introduction of Rotary tube annealing furnace

Rotary tube annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It is a product series that integrates Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal forging heating and Metal heat treatment。

Rotary tube annealing furnace

2、Rotary tube annealing furnace function

Rotary tube annealing furnaceit has the functions of normalizing, anneal, heat treatment, Casting heating and Forging heating，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，it is an ideal choice for customers to buy Rotary tube annealing furnace。

Rotary tube annealing furnace

3、Rotary tube annealing furnace HD real picture

The finished products of the Rotary tube annealing furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Rotary tube annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Rotary tube annealing furnace characteristics

The Rotary tube annealing furnace features are as follows:

1. Efficient heating

The Rotary tube annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Rotary tube annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Rotary tube annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Rotary tube annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Rotary tube annealing furnace

5、Rotary tube annealing furnace use

The purpose of Rotary tube annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Rotary tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Rotary tube annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Rotary tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Rotary tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Rotary tube annealing furnace

6、Rotary tube annealing furnace price

The Rotary tube annealing furnace price is introduced as follows:

1. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

2. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Rotary tube annealing furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Rotary tube annealing furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

3. regional advantages

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving the site is located at:Jinan, Shandong province, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

4. mass discrepancy

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

5. brand

At present, there are various brands of Rotary tube annealing furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Rotary tube annealing furnace are different.

Rotary tube annealing furnace

Rotary tube annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Rotary tube annealing furnace。