Introduction to Industrial tube annealing furnace, how much is the price of the heating furnace?

Industrial tube annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。The following is to introduce the Industrial tube annealing furnace:

1、Brief introduction of Industrial tube annealing furnace

Industrial tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of normalizing, heat treatment, Casting heating, Forging heating and hardening and tempering，Strong adaptability,energy-efficient,Easy to control,Stable and reliable,Easy to control，widely used inelectron,pharmacy,surface treatment,petroleum,metallurgy and other industries，It is mostly used in Metal forging heating, Metal tempering, Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting, Improve production efficiency and so on。

Industrial tube annealing furnace

2、Industrial tube annealing furnace function

Industrial tube annealing furnacemultifunctional, with functions such as heat treatment, anneal, quench, temper and normalizing。

Industrial tube annealing furnace

3、Introduction of advantages of Industrial tube annealing furnace

The advantages of Industrial tube annealing furnace are as follows:

1. Multiple fuel options

Although the Industrial tube annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Improve product quality

Because the Industrial tube annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Industrial tube annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Efficient combustion

The Industrial tube annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. easy to operate

The operation interface of the Industrial tube annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Industrial tube annealing furnace

4、Industrial tube annealing furnace use

The purpose of Industrial tube annealing furnace is introduced as follows:

1. Metal forging heating

The Industrial tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Industrial tube annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Industrial tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Industrial tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Industrial tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Industrial tube annealing furnace

5、Industrial tube annealing furnace quotation

The Industrial tube annealing furnace price is introduced as follows:

1. Manufacturer's sales model

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

2. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

3. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Industrial tube annealing furnace price and service can meet the actual needs of customers.

4. Sales model

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

5. Company size

There are many manufacturers of products in Jinan, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Industrial tube annealing furnace is naturally different.

Industrial tube annealing furnace

6、One-combustion energy saving company discount

Industrial tube annealing furnace is a new type of heating furnace introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for war industry and other industries. Now consult One-combustion energy savingProduction and processing的Industrial tube annealing furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Industrial tube annealing furnacethe main structure includes Radiation chamber, combustor, ventilation system, combustor, ventilation system and so on，the main features are Easy to maintain, Strong adaptability, energy-efficient, energy saving and environmental protection and Stable and reliable，It has a wide range of uses, including Metal forging heating, Metal melting and casting, Energy conservation and environmental protection, Metal heat treatment and Metal tempering。