What is a Automatic greenhouse furnace? Introduction to the advantages and characteristics of heating furnace functions

Automatic greenhouse furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is an advanced Automatic greenhouse furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Automatic greenhouse furnace

Automatic greenhouse furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the main features are Strong adaptability, energy-efficient, Strong adaptability, Stable and reliable and energy saving and environmental protection，has been favored by more and more customers.。

Automatic greenhouse furnace

2、Automatic greenhouse furnace structure composition

The Automatic greenhouse furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Automatic greenhouse furnace

3、Automatic greenhouse furnace characteristics

The Automatic greenhouse furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Automatic greenhouse furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Automatic greenhouse furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Automatic greenhouse furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Automatic greenhouse furnace

4、Automatic greenhouse furnace use

The purpose of Automatic greenhouse furnace is introduced as follows:

1. Metal forging heating

The Automatic greenhouse furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic greenhouse furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Automatic greenhouse furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic greenhouse furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Automatic greenhouse furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Automatic greenhouse furnace

5、Automatic greenhouse furnace function

Automatic greenhouse furnacemultifunctional, with functions such as normalizing, quench, hardening and tempering, anneal and hardening and tempering，energy-efficient,Stable and reliable,energy saving and environmental protection,Easy to control,Stable and reliable，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Automatic greenhouse furnace

6、One-combustion energy saving's after-sales service

Automatic greenhouse furnace after-sales service is perfect, and a complete after-sales service system is established, which can solve customers' problems anytime and anywhere. In addition, our company promises that all customers who purchase this product can enjoy a full set of pre-sale, in-sale and after-sales services.。

One-combustion energy saving

Automatic greenhouse furnaceusually used in metallurgy, pharmacy, surface treatment, machinery, aerospace and other fields，Easy to control,Easy to maintain,energy-efficient,Strong adaptability,Easy to maintain。