Introduction to Gas chamber furnace and heating furnace working principle

Gas chamber furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a popular Gas chamber furnace，can be customized according to user's needs.。

1、Brief introduction of Gas chamber furnace

Gas chamber furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Simple structure and reliable operation.，it is mainly composed of furnace chamber, combustor, ventilation system, recovery of waste heat and Radiation chamber，it has the characteristics of energy-efficient, Stable and reliable, Easy to control, energy-efficient and Stable and reliable。

Gas chamber furnace

2、Introduction of advantages of Gas chamber furnace

Gas chamber furnaces have the following advantages.

1. easy to operate

The operation interface of the Gas chamber furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Extend the service life of equipment

The Gas chamber furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Uniform heating

The Gas chamber furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Intelligent control

The Gas chamber furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Uniform heating

The Gas chamber furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Gas chamber furnace

3、Gas chamber furnace HD picture

Gas chamber furnace are widely used. The following is a multi-directional display diagram of Gas chamber furnace, and the details are full of quality and intelligence.。

Gas chamber furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Video analysis of Gas chamber furnace

You can buy Gas chamber furnace according to your needs and show you Gas chamber furnace videos.。

Gas chamber furnace

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

5、Structural characteristics of Gas chamber furnace

The Gas chamber furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Gas chamber furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a professional manufacturer of heating furnace, which produces Gas chamber furnace with the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Gas chamber furnacestructure mainly includes: convection chamber, ventilation system, furnace chamber, recovery of waste heat, Radiation chamber and so on，productThe overall structural design is simple, diverse and beautiful.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。