What is a Axial flow annealing industrial furnace? Introduction to the principle of Forging furnace structure

Axial flow annealing industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，it is an ideal choice for customers to buy Axial flow annealing industrial furnace。The following is to introduce the Axial flow annealing industrial furnace:

1、Brief introduction of Axial flow annealing industrial furnace

Axial flow annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is developed and improved by One-combustion energy saving。

Axial flow annealing industrial furnace

2、Axial flow annealing industrial furnace function

Axial flow annealing industrial furnacemultifunctional, with functions such as Forging heating, quench, Casting heating, normalizing and hardening and tempering，it has the characteristics of Stable and reliable, Easy to maintain, Easy to control, energy-efficient and Strong adaptability，it has the structure of furnace chamber, ventilation system, furnace chamber, ventilation system and convection chamber，has been favored by more and more customers.。

Axial flow annealing industrial furnace

3、Physical picture of Axial flow annealing industrial furnace

The Axial flow annealing industrial furnace is designed by One-combustion energy saving with advanced technology, and the product has high performance advantages. In order to facilitate our customers to find a satisfactory Forging furnace more quickly, the following high-definition pictures are provided for reference.。

Axial flow annealing industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Axial flow annealing industrial furnace application

Axial flow annealing industrial furnaces have the following purposes.

1. Improve production efficiency

The Axial flow annealing industrial furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Axial flow annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Axial flow annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Axial flow annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Axial flow annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Axial flow annealing industrial furnace

5、Axial flow annealing industrial furnace price advantage

The Axial flow annealing industrial furnace price is introduced as follows:

1. Overall configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Axial flow annealing industrial furnace has a higher cost performance.

2. market supply and demand

The market demand has a certain impact on the price of Axial flow annealing industrial furnace. When there are many customers who need Axial flow annealing industrial furnace in the market, there will be a phenomenon that demand exceeds supply, and then the price of Axial flow annealing industrial furnace will become higher. On the contrary, when there are very few customers who need Axial flow annealing industrial furnace, there will be a phenomenon of oversupply, and the price of Axial flow annealing industrial furnace will be reduced.

3. raw material

The quality of material selection is one of the main factors that directly affect the Axial flow annealing industrial furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

4. Brand strength

At present, there are various brands of Axial flow annealing industrial furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Axial flow annealing industrial furnace are different.

5. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Axial flow annealing industrial furnace price and service can meet the actual needs of customers.

Axial flow annealing industrial furnace

6、One-combustion energy saving's strength

The company has many years of Axial flow annealing industrial furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Axial flow annealing industrial furnaceThe structural design is more advanced and reasonable.，it mainly includes Radiation chamber, convection chamber, ventilation system, recovery of waste heat and combustor，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is mostly used in Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency, Metal tempering, Metal tempering, Improve production efficiency and so on。