Introduction to Fully automatic annealing furnace, introduction to forging furnace advantages and characteristics

Fully automatic annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a common Fully automatic annealing furnace，can be customized according to user's needs.。The following is to introduce the Fully automatic annealing furnace:

1、Brief introduction of Fully automatic annealing furnace

Fully automatic annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Fully automatic annealing furnace

2、Fully automatic annealing furnace structure

The Fully automatic annealing furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Fully automatic annealing furnace

3、Fully automatic annealing furnace performance advantage

The advantages of Fully automatic annealing furnace are as follows:

1. Efficient combustion

The Fully automatic annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. easy to operate

The operation interface of the Fully automatic annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Rapid temperature rise

The Fully automatic annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Uniform heating

The Fully automatic annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Fully automatic annealing furnace

4、Fully automatic annealing furnace principle

Fully automatic annealing furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Mainly used forMetal tempering,Metal forging heating,Improve production efficiency,Metal heat treatment andEnergy conservation and environmental protection，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，the main structure includes ventilation system, combustor, recovery of waste heat, combustor, Radiation chamber and so on，Fully automatic annealing furnaceThe overall structural design is relatively simple and compact.，is a popular Fully automatic annealing furnace。

Fully automatic annealing furnace

5、Fully automatic annealing furnace characteristics

The Fully automatic annealing furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Fully automatic annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Fully automatic annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Fully automatic annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Strong adaptability

The Fully automatic annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Fully automatic annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Fully automatic annealing furnace

Fully automatic annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is mainly composed of ventilation system, convection chamber, furnace chamber, Radiation chamber and recovery of waste heat，it has the functions of anneal, quench, heat treatment, normalizing and Forging heating。