What is a Rapid Annealing Heating Furnace? Introduction to the advantages and characteristics of the forging furnace

Rapid Annealing Heating FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

1、Brief introduction of Rapid Annealing Heating Furnace

Rapid Annealing Heating FurnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a kind of Rapid Annealing Heating Furnace manufactured by One-combustion energy saving。

Rapid Annealing Heating Furnace

2、Structural advantages of Rapid Annealing Heating Furnace

The Rapid Annealing Heating Furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Rapid Annealing Heating Furnace

3、Rapid Annealing Heating Furnace use

The purpose of Rapid Annealing Heating Furnace is introduced as follows:

1. Metal forging heating

The Rapid Annealing Heating Furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Rapid Annealing Heating Furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Rapid Annealing Heating Furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Rapid Annealing Heating Furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal tempering

By properly heating and cooling the metal material, the Rapid Annealing Heating Furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Rapid Annealing Heating Furnace

4、Rapid Annealing Heating Furnace characteristics

The Rapid Annealing Heating Furnace features are as follows:

1. Efficient heating

The Rapid Annealing Heating Furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Strong adaptability

The Rapid Annealing Heating Furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Stable and reliable

The Rapid Annealing Heating Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Rapid Annealing Heating Furnace

5、Rapid Annealing Heating Furnace HD picture

The styles and designs of Rapid Annealing Heating Furnace are diverse, and the specifications and models can be tailored according to users' needs, providing high-definition drawings for our customers' reference.。

Rapid Annealing Heating Furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Rapid Annealing Heating FurnaceWidely used inMetal tempering,Improve production efficiency,Energy conservation and environmental protection,Metal heat treatment,Improve production efficiency and so on，It is a forging heating device using gas as fuel.。