What is a Decarbonization annealing heating furnace? Introduction to the principle of Forging furnace structure

Decarbonization annealing heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，multifunctional, with functions such as normalizing, Casting heating, hardening and tempering, heat treatment and anneal，be of high quality，The price is low and affordable。

1、Brief introduction of Decarbonization annealing heating furnace

Decarbonization annealing heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Decarbonization annealing heating furnace

2、Decarbonization annealing heating furnace performance advantage

The advantages of Decarbonization annealing heating furnace are as follows:

1. Extend the service life of equipment

The Decarbonization annealing heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Intelligent control

The Decarbonization annealing heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Improve product quality

Because the Decarbonization annealing heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Improve product quality

Because the Decarbonization annealing heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Decarbonization annealing heating furnace

3、Advantages of Decarbonization annealing heating furnace principle

Decarbonization annealing heating furnaceat runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is mainly composed of Radiation chamber, furnace chamber, recovery of waste heat, convection chamber and combustor，This Decarbonization annealing heating furnaceThe overall structural design is relatively simple and compact.，is a Decarbonization annealing heating furnace，widely used in material, heat treatment, Machinery manufacturing, light industry, surface treatment and other fields，is designed by One-combustion energy saving with advanced technology。

Decarbonization annealing heating furnace

4、Decarbonization annealing heating furnace application

Decarbonization annealing heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Decarbonization annealing heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Decarbonization annealing heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal tempering

By properly heating and cooling the metal material, the Decarbonization annealing heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Decarbonization annealing heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Decarbonization annealing heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Decarbonization annealing heating furnace

5、Structural characteristics of Decarbonization annealing heating furnace

The Decarbonization annealing heating furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Decarbonization annealing heating furnace

6、Brief introduction of Decarbonization annealing heating furnace

Decarbonization annealing heating furnaceIt is a forging heating device using gas as fuel.，the main structure includes recovery of waste heat, ventilation system, Radiation chamber, convection chamber, furnace chamber and so on，it has been widely used in chemical industry, machinery, aerospace, war industry, metallurgy and other industries，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is based on One-combustion energy saving is a Decarbonization annealing heating furnace newly developed by One-combustion energy saving。

Decarbonization annealing heating furnace

Decarbonization annealing heating furnaceis a popular Decarbonization annealing heating furnace，Widely used inMetal heat treatment,Improve production efficiency,Metal forging heating,Metal melting and casting,Metal tempering and so on。