Introduction to Reflection Annealing Heating Furnace, advantages, characteristics and principles of forging furnace

Reflection Annealing Heating FurnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is widely used in aerospace, metallurgy, automobile, electron and surface treatment，Widely used in Metal melting and casting, Metal tempering, Metal forging heating, Improve production efficiency and Energy conservation and environmental protection，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，can be customized according to user's needs.。The following is to introduce the Reflection Annealing Heating Furnace:

1、Brief introduction of Reflection Annealing Heating Furnace

Reflection Annealing Heating FurnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It is a product series that integrates Metal tempering, Metal heat treatment, Metal forging heating, Improve production efficiency and Metal melting and casting，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

Reflection Annealing Heating Furnace

2、Reflection Annealing Heating Furnace function

Reflection Annealing Heating Furnaceit has the functions of Casting heating, hardening and tempering, heat treatment, Forging heating and anneal，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，it has the characteristics of Easy to control, Strong adaptability, energy-efficient, energy saving and environmental protection and Strong adaptability，it is an ideal choice for customers to buy Reflection Annealing Heating Furnace。

Reflection Annealing Heating Furnace

3、Advantages of Reflection Annealing Heating Furnace principle

Reflection Annealing Heating Furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，structure mainly includes: combustor, ventilation system, furnace chamber, Radiation chamber, ventilation system and so on，Reflection Annealing Heating FurnaceSimple structure and reliable operation.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Reflection Annealing Heating Furnace

4、Reflection Annealing Heating Furnace explanation video

Speak directly with facts on the spot。

Reflection Annealing Heating Furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It has a wide range of uses, and is often used inMetal heat treatment,Improve production efficiency,Metal tempering,Metal melting and casting,Energy conservation and environmental protection and so on。

5、Introduction of Reflection Annealing Heating Furnace characteristics

Reflection Annealing Heating Furnace has the following characteristics

1. Stable and reliable

The Reflection Annealing Heating Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Reflection Annealing Heating Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Reflection Annealing Heating Furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Strong adaptability

The Reflection Annealing Heating Furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Reflection Annealing Heating Furnace

Reflection Annealing Heating FurnaceSimple structure and advanced technology.，it is usually composed of combustor, ventilation system, furnace chamber, Radiation chamber and recovery of waste heat，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。