Introduction to Automatic loading and unloading heat treatment furnace, heating furnace specifications, model parameters

Automatic loading and unloading heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is mainly composed of combustor, Radiation chamber, ventilation system, convection chamber and ventilation system，it is an ideal choice for customers to buy Automatic loading and unloading heat treatment furnace。The following is to introduce the Automatic loading and unloading heat treatment furnace:

1、Brief introduction of Automatic loading and unloading heat treatment furnace

Automatic loading and unloading heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are energy-efficient, Easy to maintain, energy saving and environmental protection, Strong adaptability and Easy to control，the product looks beautiful.，It has the functions of Improve production efficiency, Metal heat treatment, Metal forging heating, Metal heat treatment and Metal tempering，it has the functions of Forging heating, normalizing, anneal, temper and heat treatment。

Automatic loading and unloading heat treatment furnace

2、Automatic loading and unloading heat treatment furnace principle

Automatic loading and unloading heat treatment furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，can be customized according to user's needs.。

Automatic loading and unloading heat treatment furnace

3、Automatic loading and unloading heat treatment furnace use

The purpose of Automatic loading and unloading heat treatment furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Automatic loading and unloading heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Automatic loading and unloading heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Automatic loading and unloading heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic loading and unloading heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Improve production efficiency

The Automatic loading and unloading heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Automatic loading and unloading heat treatment furnace

4、Automatic loading and unloading heat treatment furnace use

The purpose of Automatic loading and unloading heat treatment furnace is introduced as follows:

1. Metal forging heating

The Automatic loading and unloading heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic loading and unloading heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Automatic loading and unloading heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Automatic loading and unloading heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Automatic loading and unloading heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Automatic loading and unloading heat treatment furnace

5、Automatic loading and unloading heat treatment furnace structure

The Automatic loading and unloading heat treatment furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Radiation chamber

The heat load of the main place for Automatic loading and unloading heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic loading and unloading heat treatment furnace

Automatic loading and unloading heat treatment furnaceCommonly used inMetal melting and casting,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal heat treatment and so on，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。