What is a Mold shell heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Mold shell heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a Mold shell heating furnace newly developed by One-combustion energy saving。

1、Brief introduction of Mold shell heating furnace

Mold shell heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.，multifunctional, with functions such as Forging heating, quench, hardening and tempering, heat treatment and anneal，it is an ideal choice for customers to buy Mold shell heating furnace。

Mold shell heating furnace

2、Mold shell heating furnace application

Mold shell heating furnaces have the following purposes.

1. Improve production efficiency

The Mold shell heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Mold shell heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Mold shell heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Mold shell heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Mold shell heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Mold shell heating furnace

3、Working principle of Mold shell heating furnace

Mold shell heating furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Mold shell heating furnace

4、Mold shell heating furnace HD real shot

Overview of high-definition pictures,the product looks atmospheric., different specifications and models。

Mold shell heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Structural characteristics of Mold shell heating furnace

The Mold shell heating furnace structure is introduced as follows:

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. furnace chamber

A space for holding metallic materials for heating.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Radiation chamber

The heat load of the main place for Mold shell heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Mold shell heating furnace

6、One-combustion energy saving workshop real shot

On-site aerial photography of Mold shell heating furnace。

Mold shell heating furnace

As you can see from the live video.One-combustion energy saving It is mostly used in Metal forging heating, Metal tempering, Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting, Improve production efficiency and so on。

Mold shell heating furnacethe product looks beautiful.，is a kind of high quality and low price Mold shell heating furnace。