What is a Flue gas denitrification equipment inside the furnace? Introduction to the advantages and characteristics of SCR flue gas denitrification functions

Flue gas denitrification equipment inside the furnacethat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.。

1、Brief introduction of Flue gas denitrification equipment inside the furnace

Flue gas denitrification equipment inside the furnacedelective catalytic reduction technology is an efficient flue gas denitrification technology.，multifunctional, with functions such as Improve energy efficiency, environmental protection, Improve working conditions, Promote sustainable development and Improve energy efficiency。

Flue gas denitrification equipment inside the furnace

2、Flue gas denitrification equipment inside the furnace principle

Flue gas denitrification equipment inside the furnaceAmmonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，it mainly includes Catalyst supply system, Catalyst reactor, Flue gas mixing and distribution system, Temperature control and monitoring system and control system，productSimple structure and reliable operation.，the advantage is The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Flue gas denitrification equipment inside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Flue gas denitrification equipment inside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification equipment inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification equipment inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Flue gas denitrification equipment inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Flue gas denitrification equipment inside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification equipment inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.。

Flue gas denitrification equipment inside the furnace

3、Flue gas denitrification equipment inside the furnace field real shot

The following is the live video of Flue gas denitrification equipment inside the furnace designed and produced by One-combustion energy saving for users, from which we can see the The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Flue gas denitrification equipment inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Flue gas denitrification equipment inside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Flue gas denitrification equipment inside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Flue gas denitrification equipment inside the furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Flue gas denitrification equipment inside the furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification equipment inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification equipment inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements. of One-combustion energy savingFlue gas denitrification equipment inside the furnace.。

Flue gas denitrification equipment inside the furnace

As you can see from the live video.，One-combustion energy saving The overall structural design is relatively simple，it is mainly composed of Catalyst supply system, Catalyst reactor, Temperature control and monitoring system, Flue gas mixing and distribution system and control system。

4、Flue gas denitrification equipment inside the furnace characteristics

The Flue gas denitrification equipment inside the furnace features are as follows:

1. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

2. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

3. High denitration efficiency

The denitration efficiency of Flue gas denitrification equipment inside the furnace technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

4. Mature technology

After years of development and application, Flue gas denitrification equipment inside the furnace technology is very mature and has a wide application prospect.

5. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

Flue gas denitrification equipment inside the furnace

5、Flue gas denitrification equipment inside the furnace use

Flue gas denitrification equipment inside the furnaceMainly used forFlue gas denitrification,Promote sustainable development,Meet the requirements of environmental protection,environmental protection andFlue gas denitrification，the advantage is It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Flue gas denitrification equipment inside the furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Flue gas denitrification equipment inside the furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Flue gas denitrification equipment inside the furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The Flue gas denitrification equipment inside the furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Flue gas denitrification equipment inside the furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Flue gas denitrification equipment inside the furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Flue gas denitrification equipment inside the furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.，Efficient denitration,Mature and stable technology,Strong adaptability,Environmental protection and pollution-free,Efficient denitration。

Flue gas denitrification equipment inside the furnace

6、Flue gas denitrification equipment inside the furnace price concessions

The Flue gas denitrification equipment inside the furnace price is introduced as follows:

1. market demand

When the market demand for Flue gas denitrification equipment inside the furnace is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

2. Different regions

Different provinces and regions have different consumption levels, different market positioning and different prices.

3. Proper management mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

4. Self quality

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Flue gas denitrification equipment inside the furnace.

5. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Flue gas denitrification equipment inside the furnace

Flue gas denitrification equipment inside the furnaceit has the functions of Improve working conditions, Promote sustainable development, environmental protection, Improve energy efficiency and Promote sustainable development，it has the characteristics of energy saving and environmental protection, Less secondary pollution, Economically feasible, Mature technology and Strong adaptability。