Introduction to Catalyst reduction denitrification equipment and SCR flue gas denitrification advantages and features

Catalyst reduction denitrification equipmentdelective catalytic reduction technology is an efficient flue gas denitrification technology.，it is widely used incoal-fired power station,metallurgy,Gas power plant,cement plant,iron and steel plant and other industries，in the course of work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，it has the functions of environmental protection, environmental protection, Promote sustainable development, Improve working conditions and Improve energy efficiency，support customization。The following is to introduce the Catalyst reduction denitrification equipment:

1、Brief introduction of Catalyst reduction denitrification equipment

Catalyst reduction denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.。

Catalyst reduction denitrification equipment

2、Catalyst reduction denitrification equipment structure composition

The Catalyst reduction denitrification equipment structure is introduced as follows:

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

3. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

4. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

5. Reactor

It is the core component of Catalyst reduction denitrification equipment technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

Catalyst reduction denitrification equipment

3、Catalyst reduction denitrification equipment principle

Catalyst reduction denitrification equipmentthe principle is simple.Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，The overall structural design is relatively simple，it is usually composed of Catalyst reactor, control system, Catalyst supply system, Temperature control and monitoring system and Flue gas mixing and distribution system，usually used in metallurgy, iron and steel plant, Gas power plant, building materials, metallurgy and other fields，Mainly used forFlue gas denitrification,environmental protection,Promote sustainable development,Meet the requirements of environmental protection andenvironmental protection，Simple structure and reliable operation.，it mainly includes Catalyst reactor, control system, Flue gas mixing and distribution system, Temperature control and monitoring system and Catalyst supply system。

Catalyst reduction denitrification equipment

4、Catalyst reduction denitrification equipment performance advantage

The advantages of Catalyst reduction denitrification equipment are as follows:

1. Environmental friendliness

The by-products produced by Catalyst reduction denitrification equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalyst reduction denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

2. Mature and stable technology

Catalyst reduction denitrification equipment technology has been developed and applied for many years, and the technology is mature and stable. The Catalyst reduction denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalyst reduction denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

3. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Catalyst reduction denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

4. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Catalyst reduction denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalyst reduction denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

5. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalyst reduction denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalyst reduction denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

Catalyst reduction denitrification equipment

5、Catalyst reduction denitrification equipment characteristics

The Catalyst reduction denitrification equipment features are as follows:

1. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

2. Small secondary pollution

The by-products produced in the Catalyst reduction denitrification equipment opening process are nitrogen and water vapor, and there is no secondary pollution problem.

3. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

4. Mature technology

After years of development and application, Catalyst reduction denitrification equipment technology is very mature and has a wide application prospect.

5. High denitration efficiency

The denitration efficiency of Catalyst reduction denitrification equipment technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

Catalyst reduction denitrification equipment

Catalyst reduction denitrification equipmentwidely used in building materials, coal-fired power station, building materials, Gas power plant, cement plant and other fields，it has the functions of Improve working conditions, environmental protection, Promote sustainable development, Improve energy efficiency and Improve working conditions，Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalyst reduction denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalyst reduction denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalyst reduction denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalyst reduction denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalyst reduction denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalyst reduction denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.。