What is a Continuous well tube furnace? Forging furnace specifications, models, and parameters

Continuous well tube furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Continuous well tube furnace:

1、Brief introduction of Continuous well tube furnace

Continuous well tube furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，reliable quality。

Continuous well tube furnace

2、Working principle of Continuous well tube furnace

Continuous well tube furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Continuous well tube furnace

3、Continuous well tube furnace characteristics

The Continuous well tube furnace features are as follows:

1. Efficient heating

The Continuous well tube furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

The combustion system and ventilation system of the Continuous well tube furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Continuous well tube furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Continuous well tube furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Stable and reliable

The Continuous well tube furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Continuous well tube furnace

4、Continuous well tube furnace video live broadcast

You can buy Continuous well tube furnace according to your needs and show you Continuous well tube furnace videos.。

Continuous well tube furnace

As you can see from the live video.，One-combustion energy saving at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

5、Continuous well tube furnace structure composition

The Continuous well tube furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Continuous well tube furnace

6、Continuous well tube furnace video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Continuous well tube furnace production process and production site, and gain favorable comments and recognition from customers.。

Continuous well tube furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd features include Strong adaptability, Easy to control, Stable and reliable, energy-efficient and Strong adaptability。

Continuous well tube furnaceMainly used forMetal tempering,Improve production efficiency,Energy conservation and environmental protection,Metal forging heating andMetal melting and casting，it is widely used in building materials, chemical industry, petroleum, light industry, shipping and other industries，The structural design is simple, novel and special.，it is mainly composed of ventilation system, ventilation system, combustor, ventilation system and recovery of waste heat。