What is a Square Well Heat Treatment Furnace? Introduction to the advantages and characteristics of the Forging furnace

Square Well Heat Treatment FurnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Square Well Heat Treatment Furnace:

1、Brief introduction of Square Well Heat Treatment Furnace

Square Well Heat Treatment FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，multifunctional, with functions such as normalizing, temper, anneal, heat treatment and hardening and tempering，the main structure includes ventilation system, combustor, furnace chamber, convection chamber, convection chamber and so on，productThe overall structural design is relatively simple and compact.，the product looks atmospheric.，it is widely used in building materials, chemical industry, surface treatment, automobile and machinery。

Square Well Heat Treatment Furnace

2、Advantages of Square Well Heat Treatment Furnace principle

Square Well Heat Treatment Furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is mostly used in Metal melting and casting, Improve production efficiency, Metal forging heating, Improve production efficiency, Metal tempering, Energy conservation and environmental protection and so on，it has been widely used in material, Machinery manufacturing, Household necessities, electron, light industry and other industries，is a common Square Well Heat Treatment Furnace，it has the characteristics of Easy to maintain, Stable and reliable, energy saving and environmental protection, energy-efficient and Strong adaptability。

Square Well Heat Treatment Furnace

3、Square Well Heat Treatment Furnace advantage

The advantages of Square Well Heat Treatment Furnace are as follows:

1. Intelligent control

The Square Well Heat Treatment Furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Uniform heating

The Square Well Heat Treatment Furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Improve product quality

Because the Square Well Heat Treatment Furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Efficient combustion

The Square Well Heat Treatment Furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Wide application range

The Square Well Heat Treatment Furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Square Well Heat Treatment Furnace

4、Square Well Heat Treatment Furnace function

Square Well Heat Treatment Furnacemultifunctional, with functions such as heat treatment, normalizing, anneal, hardening and tempering and temper，It is a product series that integrates Metal melting and casting, Metal heat treatment, Improve production efficiency, Energy conservation and environmental protection and Metal heat treatment，the product looks beautiful.，the product looks atmospheric.，Structure consists of ventilation system, Radiation chamber, combustor, furnace chamber, recovery of waste heat and so on。

Square Well Heat Treatment Furnace

5、Square Well Heat Treatment Furnace use

The purpose of Square Well Heat Treatment Furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Square Well Heat Treatment Furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Square Well Heat Treatment Furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Energy conservation and environmental protection

The Square Well Heat Treatment Furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Square Well Heat Treatment Furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Square Well Heat Treatment Furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Square Well Heat Treatment Furnace

Square Well Heat Treatment FurnaceThe overall structural design is simple and novel.，generally, it is composed of furnace chamber, recovery of waste heat, Radiation chamber, combustor, ventilation system and other major components，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It has a wide range of uses, including Metal forging heating, Metal forging heating, Metal tempering, Energy conservation and environmental protection and Metal heat treatment。