What is a Well type industrial annealing furnace? Introduction to the advantages and characteristics of heating furnace functions

Well type industrial annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Easy to control,Easy to maintain,Strong adaptability,energy-efficient,Stable and reliable。The following is to introduce the Well type industrial annealing furnace:

1、Brief introduction of Well type industrial annealing furnace

Well type industrial annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，Simple structure and advanced technology.，the main structure includes recovery of waste heat, ventilation system, convection chamber, Radiation chamber, Radiation chamber and so on，is designed by One-combustion energy saving with advanced technology。

Well type industrial annealing furnace

2、Structural characteristics of Well type industrial annealing furnace

The Well type industrial annealing furnace has the following structure

1. Radiation chamber

The heat load of the main place for Well type industrial annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Well type industrial annealing furnace

3、Introduction of Well type industrial annealing furnace characteristics

Well type industrial annealing furnace has the following characteristics

1. Easy to maintain

The structural design of the Well type industrial annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

The combustion system and ventilation system of the Well type industrial annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Stable and reliable

The Well type industrial annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Well type industrial annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Well type industrial annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Well type industrial annealing furnace

4、Well type industrial annealing furnace video detail

On-site aerial photography of Well type industrial annealing furnace。

Well type industrial annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a common Well type industrial annealing furnace。

5、Well type industrial annealing furnace use

The purpose of Well type industrial annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Well type industrial annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Well type industrial annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type industrial annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Well type industrial annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Well type industrial annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Well type industrial annealing furnace

6、How much is the Well type industrial annealing furnace?

The Well type industrial annealing furnace price is introduced as follows:

1. Quality advantages and disadvantages

One-combustion energy saving attaches great importance to the quality of products, which can be reflected in the manufacturing process of Well type industrial annealing furnace and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

2. Manufacturer scale

There are many manufacturers of products in Jinan, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Well type industrial annealing furnace is naturally different.

3. market demand

If there is a large demand for Well type industrial annealing furnace in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

4. technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. deploy

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Well type industrial annealing furnace has a higher cost performance.

Well type industrial annealing furnace

Well type industrial annealing furnaceit has the characteristics of Stable and reliable, Strong adaptability, Easy to maintain, energy-efficient and energy saving and environmental protection，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the functions of quench, Forging heating, Casting heating, quench and Casting heating。