What is a Stick style continuous spheroidization annealing furnace? Introduction to the advantages and characteristics of heating furnace functions

Stick style continuous spheroidization annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of Stick style continuous spheroidization annealing furnace manufactured by One-combustion energy saving。

1、Brief introduction of Stick style continuous spheroidization annealing furnace

Stick style continuous spheroidization annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

Stick style continuous spheroidization annealing furnace

2、Stick style continuous spheroidization annealing furnace video

You can buy Stick style continuous spheroidization annealing furnace according to your needs and show you Stick style continuous spheroidization annealing furnace videos.。

Stick style continuous spheroidization annealing furnace

As you can see from the live video.，One-combustion energy saving The structural design is simple, novel and special.，it is usually composed of ventilation system, ventilation system, recovery of waste heat, ventilation system and ventilation system。

3、Stick style continuous spheroidization annealing furnace field real shot

One-combustion energy saving Stick style continuous spheroidization annealing furnacethe product looks beautiful., the following is a panoramic shot of the Stick style continuous spheroidization annealing furnace for your reference.。

Stick style continuous spheroidization annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Stick style continuous spheroidization annealing furnace structure

The Stick style continuous spheroidization annealing furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. Radiation chamber

The heat load of the main place for Stick style continuous spheroidization annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Stick style continuous spheroidization annealing furnace

5、Stick style continuous spheroidization annealing furnace use

The purpose of Stick style continuous spheroidization annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Stick style continuous spheroidization annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Stick style continuous spheroidization annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Stick style continuous spheroidization annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Stick style continuous spheroidization annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick style continuous spheroidization annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Stick style continuous spheroidization annealing furnace

6、Stick style continuous spheroidization annealing furnace characteristics

The Stick style continuous spheroidization annealing furnace features are as follows:

1. Stable and reliable

The Stick style continuous spheroidization annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Strong adaptability

The Stick style continuous spheroidization annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Efficient heating

The Stick style continuous spheroidization annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Stick style continuous spheroidization annealing furnace

Stick style continuous spheroidization annealing furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，usually used in pharmacy, metallurgy, light industry, surface treatment, heat treatment and other fields。