What is a Energy saving heat treatment chain furnace? Introduction to the principle of Forging furnace structure

Energy saving heat treatment chain furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a common Energy saving heat treatment chain furnace，Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，has been favored by more and more customers.。The following is to introduce the Energy saving heat treatment chain furnace:

1、Brief introduction of Energy saving heat treatment chain furnace

Energy saving heat treatment chain furnaceIt is a forging heating device using gas as fuel.，Structure consists of convection chamber, ventilation system, Radiation chamber, convection chamber, ventilation system and so on，it is an ideal choice for customers to buy Energy saving heat treatment chain furnace。

Energy saving heat treatment chain furnace

2、Introduction of Energy saving heat treatment chain furnace characteristics

Energy saving heat treatment chain furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Energy saving heat treatment chain furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Strong adaptability

The Energy saving heat treatment chain furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Energy saving heat treatment chain furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

The combustion system and ventilation system of the Energy saving heat treatment chain furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Energy saving heat treatment chain furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Energy saving heat treatment chain furnace

3、Energy saving heat treatment chain furnace principle

Energy saving heat treatment chain furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is a popular Energy saving heat treatment chain furnace。

Energy saving heat treatment chain furnace

4、Introduction of Energy saving heat treatment chain furnace characteristics

Energy saving heat treatment chain furnace has the following characteristics

1. Efficient heating

The Energy saving heat treatment chain furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Energy saving heat treatment chain furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Strong adaptability

The Energy saving heat treatment chain furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Stable and reliable

The Energy saving heat treatment chain furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Energy saving heat treatment chain furnace

5、Energy saving heat treatment chain furnace price

The Energy saving heat treatment chain furnace price is introduced as follows:

1. Proper management mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

2. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Energy saving heat treatment chain furnace.

3. product configuration

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Energy saving heat treatment chain furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Energy saving heat treatment chain furnace is reasonable for products with the same configuration.

4. Brand strength

At present, there are various brands of Energy saving heat treatment chain furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Energy saving heat treatment chain furnace are different.

5. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Energy saving heat treatment chain furnace price and service can meet the actual needs of customers.

Energy saving heat treatment chain furnace

6、Company service

One-combustion energy saving manufacturer services include three aspects: pre-sale, in-sale and after-sale. Each stage is closely connected with each other, sincerely serving each customer, focusing on customer needs, providing customers with product knowledge training and regularly repairing products for customers, etc., which has been appreciated by new and old customers.。

One-combustion energy saving

Energy saving heat treatment chain furnaceis a Energy saving heat treatment chain furnace，It is mostly used in Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Metal forging heating, Metal heat treatment, Metal melting and casting and so on，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。