Introduction to Natural gas storage chain heat treatment furnace, Forging furnace specifications, model parameters

Natural gas storage chain heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Simple structure and advanced technology.，it is usually composed of combustor, furnace chamber, Radiation chamber, recovery of waste heat and ventilation system，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，be loved by our customers.。The following is to introduce the Natural gas storage chain heat treatment furnace:

1、Brief introduction of Natural gas storage chain heat treatment furnace

Natural gas storage chain heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a kind of high quality and low price Natural gas storage chain heat treatment furnace。

Natural gas storage chain heat treatment furnace

2、Natural gas storage chain heat treatment furnace use

The purpose of Natural gas storage chain heat treatment furnace is introduced as follows:

1. Improve production efficiency

The Natural gas storage chain heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Natural gas storage chain heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Natural gas storage chain heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Natural gas storage chain heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Natural gas storage chain heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Natural gas storage chain heat treatment furnace

3、Natural gas storage chain heat treatment furnace structure

The Natural gas storage chain heat treatment furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Natural gas storage chain heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Natural gas storage chain heat treatment furnace

4、Natural gas storage chain heat treatment furnace real shot picture

Provide a variety of specifications and models of Natural gas storage chain heat treatment furnace, high-definition picture list.。

Natural gas storage chain heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Natural gas storage chain heat treatment furnace characteristics

The Natural gas storage chain heat treatment furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Natural gas storage chain heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Efficient heating

The Natural gas storage chain heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Stable and reliable

The Natural gas storage chain heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Natural gas storage chain heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Natural gas storage chain heat treatment furnace

6、company strength

The company has many years of Natural gas storage chain heat treatment furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Natural gas storage chain heat treatment furnaceis a common Natural gas storage chain heat treatment furnace，the product looks atmospheric.，It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal tempering,Metal heat treatment,Metal tempering,Metal melting and casting and so on。