Introduction to Regenerative burner stepper heating furnace, heating furnace specifications, model parameters

Regenerative burner stepper heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main structure includes combustor, ventilation system, recovery of waste heat, ventilation system, Radiation chamber and so on，Widely used inMetal melting and casting,Metal tempering,Improve production efficiency,Metal forging heating,Energy conservation and environmental protection and so on。

1、Brief introduction of Regenerative burner stepper heating furnace

Regenerative burner stepper heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，it can be used in light industry, pharmacy, surface treatment, Household necessities, metallurgy and other industries，it is mainly composed of convection chamber, furnace chamber, combustor, Radiation chamber and convection chamber，This productThe overall structural design is relatively simple and compact.。

Regenerative burner stepper heating furnace

2、Regenerative burner stepper heating furnace structure

The Regenerative burner stepper heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Regenerative burner stepper heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Regenerative burner stepper heating furnace

3、Regenerative burner stepper heating furnace use

The purpose of Regenerative burner stepper heating furnace is introduced as follows:

1. Metal forging heating

The Regenerative burner stepper heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner stepper heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Regenerative burner stepper heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Regenerative burner stepper heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Regenerative burner stepper heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Regenerative burner stepper heating furnace

4、Working principle of Regenerative burner stepper heating furnace

Regenerative burner stepper heating furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has been widely used in shipping, automobile, machinery, aerospace, material and other industries，The overall structural design is relatively simple，it is mainly composed of ventilation system, convection chamber, Radiation chamber, recovery of waste heat and ventilation system。

Regenerative burner stepper heating furnace

5、Regenerative burner stepper heating furnace working site

You can buy Regenerative burner stepper heating furnace according to your needs and show you Regenerative burner stepper heating furnace videos.。

Regenerative burner stepper heating furnace

As you can see from the live video.，One-combustion energy saving at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

6、Structural characteristics of Regenerative burner stepper heating furnace

The Regenerative burner stepper heating furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Regenerative burner stepper heating furnace

Regenerative burner stepper heating furnaceis a Regenerative burner stepper heating furnace，the main structure includes ventilation system, ventilation system, recovery of waste heat, furnace chamber and furnace chamber，productThe overall structural design is simple, diverse and beautiful.，Easy to maintain,energy saving and environmental protection,Strong adaptability,Stable and reliable,Easy to control。