Introduction to Regenerative burner natural gas trolley furnace and Forging furnace working principle

Regenerative burner natural gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，features include Easy to control, energy-efficient, energy saving and environmental protection, Stable and reliable and Strong adaptability，it has the functions of Forging heating, quench, hardening and tempering, temper and anneal，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。The following is to introduce the Regenerative burner natural gas trolley furnace:

1、Brief introduction of Regenerative burner natural gas trolley furnace

Regenerative burner natural gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，customizable。

Regenerative burner natural gas trolley furnace

2、Regenerative burner natural gas trolley furnace application

Regenerative burner natural gas trolley furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Regenerative burner natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Regenerative burner natural gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Regenerative burner natural gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Regenerative burner natural gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Regenerative burner natural gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative burner natural gas trolley furnace

3、Physical picture of Regenerative burner natural gas trolley furnace

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Regenerative burner natural gas trolley furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Regenerative burner natural gas trolley furnace function

Regenerative burner natural gas trolley furnacemultifunctional, with functions such as normalizing, normalizing, temper, anneal and Casting heating，The structural design is simple, novel and special.，Structure consists of convection chamber, Radiation chamber, furnace chamber, Radiation chamber, combustor and so on，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the characteristics of energy saving and environmental protection, Easy to maintain, Strong adaptability, Stable and reliable and Easy to control，be loved by our customers.。

Regenerative burner natural gas trolley furnace

5、Regenerative burner natural gas trolley furnace structure

The Regenerative burner natural gas trolley furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Regenerative burner natural gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Regenerative burner natural gas trolley furnace

6、How much is the Regenerative burner natural gas trolley furnace?

The Regenerative burner natural gas trolley furnace price is introduced as follows:

1. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

2. cost of production

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Regenerative burner natural gas trolley furnace will also be reduced.

3. market demand

If there is a large demand for Regenerative burner natural gas trolley furnace in the market, the price of Regenerative burner natural gas trolley furnace will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. region

Different provinces and regions have different consumption levels, different market positioning and different prices.

Regenerative burner natural gas trolley furnace

Regenerative burner natural gas trolley furnaceIt is a forging heating device using gas as fuel.，structure mainly includes: recovery of waste heat, combustor, ventilation system, recovery of waste heat, ventilation system and so on，It is a product series that integrates Metal forging heating, Improve production efficiency, Metal tempering, Metal heat treatment and Metal forging heating。