Introduction to Two end high-temperature gas trolley furnace, advantages, characteristics and principles of forging furnace

Two end high-temperature gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.，it has been widely used in electron, machinery, Machinery manufacturing, aerospace, building materials and other industries。

1、Brief introduction of Two end high-temperature gas trolley furnace

Two end high-temperature gas trolley furnaceIt is a forging heating device using gas as fuel.，It can be used for Metal forging heating, Metal heat treatment, Metal tempering, Metal melting and casting, Metal forging heating, Improve production efficiency and so on，support customization。

Two end high-temperature gas trolley furnace

2、Two end high-temperature gas trolley furnace performance advantage

Two end high-temperature gas trolley furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Two end high-temperature gas trolley furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Intelligent control

The Two end high-temperature gas trolley furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Wide application range

The Two end high-temperature gas trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Extend the service life of equipment

The Two end high-temperature gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Uniform heating

The Two end high-temperature gas trolley furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Two end high-temperature gas trolley furnace

3、Two end high-temperature gas trolley furnace use

The purpose of Two end high-temperature gas trolley furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Two end high-temperature gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Two end high-temperature gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Two end high-temperature gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Two end high-temperature gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Two end high-temperature gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Two end high-temperature gas trolley furnace

4、Two end high-temperature gas trolley furnace function

Two end high-temperature gas trolley furnaceit has the functions of hardening and tempering, Forging heating, normalizing, heat treatment and anneal，be of high quality。

Two end high-temperature gas trolley furnace

5、Structural characteristics of Two end high-temperature gas trolley furnace

The Two end high-temperature gas trolley furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Radiation chamber

The heat load of the main place for Two end high-temperature gas trolley furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Two end high-temperature gas trolley furnace

6、One-combustion energy saving's strength

The company has many years of Two end high-temperature gas trolley furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Two end high-temperature gas trolley furnaceit is widely used inpharmacy,automobile,metallurgy,material,heat treatment and other industries，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。