What is a Double door and double car trolley forging furnace? forging furnace specifications, models, and parameters

Double door and double car trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Double door and double car trolley forging furnace

Double door and double car trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Widely used inEnergy conservation and environmental protection,Metal melting and casting,Metal tempering,Improve production efficiency,Energy conservation and environmental protection and so on，the product looks beautiful.，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，customizable。

Double door and double car trolley forging furnace

2、Video analysis of Double door and double car trolley forging furnace

The following is the live video of Double door and double car trolley forging furnace designed and produced by One-combustion energy saving for users, from which we can see the It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time. of One-combustion energy savingDouble door and double car trolley forging furnace.。

Double door and double car trolley forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

3、Double door and double car trolley forging furnace function

Double door and double car trolley forging furnaceit has the functions of quench, anneal, Casting heating, quench and hardening and tempering，it has the characteristics of Strong adaptability, energy-efficient, Stable and reliable, Easy to control and Easy to maintain，it is usually composed of combustor, Radiation chamber, recovery of waste heat, ventilation system and convection chamber。

Double door and double car trolley forging furnace

4、Double door and double car trolley forging furnace video detail

Speak directly with facts on the spot。

Double door and double car trolley forging furnace

As you can see from the live video.，One-combustion energy saving multifunctional, with functions such as Forging heating, normalizing, temper, anneal and heat treatment。

5、Double door and double car trolley forging furnace use

The purpose of Double door and double car trolley forging furnace is introduced as follows:

1. Energy conservation and environmental protection

The Double door and double car trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Double door and double car trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Double door and double car trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Double door and double car trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Double door and double car trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Double door and double car trolley forging furnace

6、How much is the Double door and double car trolley forging furnace?

The Double door and double car trolley forging furnace price is introduced as follows:

1. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. Sales model

There are direct selling manufacturers and agents in the market. Agents are higher than direct selling manufacturers, mainly because agents get goods from manufacturers, sell them to customers and earn the difference from middlemen, so the natural price is higher.

3. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Double door and double car trolley forging furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Double door and double car trolley forging furnace price can meet the purchasing needs of customers.

4. cost of production

The production cost is mainly the purchase of raw materials. One-combustion energy saving attaches great importance to the purchase of raw materials to ensure the comprehensive quality of products. Only excellent raw materials can produce excellent products, and the input cost of raw materials has a direct relationship with the formulation of product prices. Under the premise of ensuring excellent product performance, One-combustion energy saving strives to reduce the input cost of products, and customers are very satisfied with this.

5. Configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Double door and double car trolley forging furnace price is affected by the configuration, and the price varies.

Double door and double car trolley forging furnace

Double door and double car trolley forging furnacefeatures include Easy to control, Stable and reliable, energy-efficient, energy saving and environmental protection and Easy to maintain，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。