Introduction to High temperature circulating trolley furnace, Forging furnace specifications, model parameters

High temperature circulating trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is mainly composed of furnace chamber, combustor, Radiation chamber, ventilation system and furnace chamber，This High temperature circulating trolley furnaceThe structural design is simple, novel and special.，it can be used in Household necessities, metallurgy, light industry, aerospace, chemical industry and other industries。The following is to introduce the High temperature circulating trolley furnace:

1、Brief introduction of High temperature circulating trolley furnace

High temperature circulating trolley furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It can be used for Energy conservation and environmental protection, Metal melting and casting, Metal forging heating, Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection and so on，it has the functions of hardening and tempering, normalizing, quench, temper and anneal，it has the characteristics of Stable and reliable, energy-efficient, Strong adaptability, energy saving and environmental protection and Stable and reliable，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

High temperature circulating trolley furnace

2、High temperature circulating trolley furnace characteristics

The High temperature circulating trolley furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Strong adaptability

The High temperature circulating trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The High temperature circulating trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Stable and reliable

The High temperature circulating trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the High temperature circulating trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

High temperature circulating trolley furnace

3、Working principle of High temperature circulating trolley furnace

High temperature circulating trolley furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

High temperature circulating trolley furnace

4、High temperature circulating trolley furnace function

High temperature circulating trolley furnacemultifunctional, with functions such as Forging heating, hardening and tempering, anneal, normalizing and quench，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a forging heating device using gas as fuel.，is based on One-combustion energy saving is a High temperature circulating trolley furnace newly developed by One-combustion energy saving。

High temperature circulating trolley furnace

5、High temperature circulating trolley furnace use

The purpose of High temperature circulating trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The High temperature circulating trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the High temperature circulating trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, High temperature circulating trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of High temperature circulating trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Improve production efficiency

The High temperature circulating trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

High temperature circulating trolley furnace

High temperature circulating trolley furnacefeatures include Easy to maintain, Easy to control, energy-efficient, energy saving and environmental protection and Stable and reliable，the product looks beautiful.，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes recovery of waste heat, combustor, ventilation system, ventilation system, convection chamber and so on。