What is a Trolley type low-temperature heating furnace? Introduction to the advantages and characteristics of the forging furnace

Trolley type low-temperature heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a popular Trolley type low-temperature heating furnace，Cheap and high quality。

1、Brief introduction of Trolley type low-temperature heating furnace

Trolley type low-temperature heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It is a product series that integrates Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting, Metal forging heating and Metal heat treatment，the product looks atmospheric.，is a common Trolley type low-temperature heating furnace，It has a wide range of uses, including Improve production efficiency, Energy conservation and environmental protection, Metal tempering, Metal melting and casting and Metal forging heating。

Trolley type low-temperature heating furnace

2、Trolley type low-temperature heating furnace picture

The finished products of the Trolley type low-temperature heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Trolley type low-temperature heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Trolley type low-temperature heating furnace use

The purpose of Trolley type low-temperature heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Trolley type low-temperature heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Trolley type low-temperature heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Trolley type low-temperature heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Trolley type low-temperature heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Trolley type low-temperature heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Trolley type low-temperature heating furnace

4、Trolley type low-temperature heating furnace explanation video

The following is the live video of Trolley type low-temperature heating furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency. of One-combustion energy savingproduce的Trolley type low-temperature heating furnace.。

Trolley type low-temperature heating furnace

As you can see from the live video.，One-combustion energy saving is a kind of high quality and low price Trolley type low-temperature heating furnace。

5、Trolley type low-temperature heating furnace principle

Trolley type low-temperature heating furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.，is a Trolley type low-temperature heating furnace，the main features are Stable and reliable, Strong adaptability, Easy to maintain, Easy to control and energy-efficient，is a Trolley type low-temperature heating furnace newly developed by One-combustion energy saving。

Trolley type low-temperature heating furnace

6、Advantages of Trolley type low-temperature heating furnace principle

Trolley type low-temperature heating furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it has the functions of normalizing, quench, heat treatment, temper and quench，Widely used inEnergy conservation and environmental protection,Metal forging heating,Metal melting and casting,Metal tempering,Metal heat treatment and so on，multifunctional, with functions such as hardening and tempering, normalizing, Casting heating, Forging heating and anneal，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.。

Trolley type low-temperature heating furnace

Trolley type low-temperature heating furnacethe principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the functions of heat treatment, Casting heating, Forging heating, hardening and tempering and anneal。