What is a Round tube heating furnace? Introduction to the advantages and characteristics of heating furnace functions

Round tube heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，structure mainly includes: furnace chamber, ventilation system, furnace chamber, combustor, ventilation system and so on，Round tube heating furnaceThe structural design is simple, novel and special.，It is mostly used in Metal forging heating, Metal melting and casting, Energy conservation and environmental protection, Metal heat treatment, Metal forging heating, Improve production efficiency and so on。

1、Brief introduction of Round tube heating furnace

Round tube heating furnaceIt is a forging heating device using gas as fuel.，it has been widely used in aerospace, shipping, building materials, Household necessities, Machinery manufacturing and other industries，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，it is an ideal choice for customers to buy Round tube heating furnace。

Round tube heating furnace

2、Introduction of Round tube heating furnace characteristics

Round tube heating furnace has the following characteristics

1. Stable and reliable

The Round tube heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Round tube heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Round tube heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Round tube heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Round tube heating furnace

3、Round tube heating furnace video detail

Speak directly with facts on the spot。

Round tube heating furnace

As you can see from the live video.，One-combustion energy saving at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

4、Round tube heating furnace field real shot

The Round tube heating furnace has been upgraded, and the beauty of details is appreciated.。

Round tube heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Round tube heating furnace quotation

The Round tube heating furnace price is introduced as follows:

1. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

2. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Round tube heating furnace price and service can meet the actual needs of customers.

3. regional advantages

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Round tube heating furnace.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. Brand strength

At present, there are various brands of Round tube heating furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Round tube heating furnace are different.

Round tube heating furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a professional manufacturer of heating furnace, which produces Round tube heating furnace with the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Round tube heating furnacethe main structure includes recovery of waste heat, Radiation chamber, convection chamber, ventilation system and furnace chamber，This productThe overall structural design is simple, diverse and beautiful.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。