What is a Regenerative natural gas box furnace? Introduction to the principle of Forging furnace structure

Regenerative natural gas box furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as hardening and tempering, quench, hardening and tempering, Forging heating and temper，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。The following is to introduce the Regenerative natural gas box furnace:

1、Brief introduction of Regenerative natural gas box furnace

Regenerative natural gas box furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，the main features are Stable and reliable, Easy to maintain, Easy to control, Strong adaptability and energy-efficient，is a Regenerative natural gas box furnace newly developed by One-combustion energy saving。

Regenerative natural gas box furnace

2、Introduction of Regenerative natural gas box furnace characteristics

Regenerative natural gas box furnace has the following characteristics

1. Easy to maintain

The structural design of the Regenerative natural gas box furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Regenerative natural gas box furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Regenerative natural gas box furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative natural gas box furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Regenerative natural gas box furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Regenerative natural gas box furnace

3、Regenerative natural gas box furnace structure

The Regenerative natural gas box furnace has the following structure

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Radiation chamber

The heat load of the main place for Regenerative natural gas box furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Regenerative natural gas box furnace

4、Regenerative natural gas box furnace function

Regenerative natural gas box furnacemultifunctional, with functions such as normalizing, Casting heating, heat treatment, anneal and quench，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Widely used inMetal forging heating,Improve production efficiency,Energy conservation and environmental protection,Metal melting and casting,Metal tempering and so on，it is mainly composed of convection chamber, recovery of waste heat, ventilation system, Radiation chamber and ventilation system，low in price，modern technology。

Regenerative natural gas box furnace

5、Regenerative natural gas box furnace video

On-site aerial photography of Regenerative natural gas box furnace。

Regenerative natural gas box furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has been widely used in Household necessities, shipping, war industry, electron, building materials and other industries。

6、One-combustion energy saving company discount

Regenerative natural gas box furnace is a new type of Forging furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for machinery and other industries. Now consult Regenerative natural gas box furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Regenerative natural gas box furnacegenerally, it is composed of ventilation system, furnace chamber, combustor, Radiation chamber, ventilation system and other major components，This Regenerative natural gas box furnaceThe structure is novel, special, advanced, reasonable and scientific.，features include energy saving and environmental protection, Stable and reliable, Easy to control, Easy to maintain and Strong adaptability，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。