What is a Mobile heating furnace box type? How much is the price of the forging furnace?

Mobile heating furnace box typeIt is an efficient, energy-saving and environment-friendly metal heating device.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，Strong adaptability,energy-efficient,Easy to control,energy saving and environmental protection,Stable and reliable，it has the structure of convection chamber, Radiation chamber, convection chamber, recovery of waste heat and furnace chamber，has been favored by more and more customers.。The following is to introduce the Mobile heating furnace box type:

1、Brief introduction of Mobile heating furnace box type

Mobile heating furnace box typeIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of hardening and tempering, anneal, hardening and tempering, normalizing and Casting heating，Cheap and high quality。

Mobile heating furnace box type

2、Mobile heating furnace box type characteristics

The Mobile heating furnace box type features are as follows:

1. Strong adaptability

The Mobile heating furnace box type is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Mobile heating furnace box type further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Stable and reliable

The Mobile heating furnace box type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Mobile heating furnace box type can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Stable and reliable

The Mobile heating furnace box type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Mobile heating furnace box type

3、Mobile heating furnace box type characteristics

The Mobile heating furnace box type features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Mobile heating furnace box type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Efficient heating

The Mobile heating furnace box type can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Strong adaptability

The Mobile heating furnace box type is suitable for forging and heating of various metal materials and has a wide range of applications.

Mobile heating furnace box type

4、Mobile heating furnace box type use

The purpose of Mobile heating furnace box type is introduced as follows:

1. Metal forging heating

The Mobile heating furnace box type can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Mobile heating furnace box types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Mobile heating furnace box types can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Mobile heating furnace box type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Mobile heating furnace box type can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Mobile heating furnace box type

5、Mobile heating furnace box type function

Mobile heating furnace box typemultifunctional, with functions such as heat treatment, quench, anneal, temper and Forging heating，the product looks atmospheric.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，can be customized according to user's needs.。

Mobile heating furnace box type

6、Why choose One-combustion energy saving?

Choosing a suitable Mobile heating furnace box type manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Mobile heating furnace box type products that meet the demand and have good cost performance.。

One-combustion energy saving

Mobile heating furnace box typeUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it has the characteristics of Easy to maintain, Strong adaptability, energy-efficient, Strong adaptability and energy saving and environmental protection，the product looks beautiful.。