Introduction to Through type high-temperature quenching heating furnace, advantages, characteristics and principles of Forging furnace

Through type high-temperature quenching heating furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，has been favored by more and more customers.。The following is to introduce the Through type high-temperature quenching heating furnace:

1、Brief introduction of Through type high-temperature quenching heating furnace

Through type high-temperature quenching heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Through type high-temperature quenching heating furnace

2、Through type high-temperature quenching heating furnace application

Through type high-temperature quenching heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Through type high-temperature quenching heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Through type high-temperature quenching heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Through type high-temperature quenching heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Through type high-temperature quenching heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal heat treatment

In addition to forging heating, Through type high-temperature quenching heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Through type high-temperature quenching heating furnace

3、Functional advantages of Through type high-temperature quenching heating furnace

Through type high-temperature quenching heating furnaces have the following advantages.

1. Intelligent control

The Through type high-temperature quenching heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Extend the service life of equipment

The Through type high-temperature quenching heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Improve product quality

Because the Through type high-temperature quenching heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Rapid temperature rise

The Through type high-temperature quenching heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Through type high-temperature quenching heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Through type high-temperature quenching heating furnace

4、Structural advantages of Through type high-temperature quenching heating furnace

The Through type high-temperature quenching heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Through type high-temperature quenching heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Through type high-temperature quenching heating furnace

5、Through type high-temperature quenching heating furnace video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Through type high-temperature quenching heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。

6、Brief introduction of Through type high-temperature quenching heating furnace

Through type high-temperature quenching heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are Easy to maintain, Strong adaptability, energy-efficient, energy saving and environmental protection and Stable and reliable，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it can be used in shipping, electron, war industry, material, machinery and other industries，multifunctional, with functions such as Forging heating, temper, quench, normalizing and Casting heating。

Through type high-temperature quenching heating furnace

Through type high-temperature quenching heating furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the characteristics of Stable and reliable, energy saving and environmental protection, Easy to control, Easy to control and Stable and reliable，it is mainly composed of ventilation system, furnace chamber, combustor, recovery of waste heat and ventilation system，This Through type high-temperature quenching heating furnaceThe structural design is more advanced and reasonable.。