What is a Forging and quenching industrial furnace? Introduction to the principle of heating furnace structure

Forging and quenching industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，the main features are Strong adaptability, energy-efficient, Easy to maintain, Stable and reliable and Easy to maintain，is a Forging and quenching industrial furnace，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Forging and quenching industrial furnace:

1、Brief introduction of Forging and quenching industrial furnace

Forging and quenching industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is widely used in surface treatment, material, aerospace, metallurgy and chemical industry，multifunctional, with functions such as Casting heating, hardening and tempering, anneal, quench and Forging heating，Commonly used inMetal tempering,Energy conservation and environmental protection,Metal heat treatment,Metal forging heating,Metal melting and casting and so on，support customization。

Forging and quenching industrial furnace

2、Forging and quenching industrial furnace structure

The Forging and quenching industrial furnace structure is introduced as follows:

1. Radiation chamber

The heat load of the main place for Forging and quenching industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

Forging and quenching industrial furnace

3、Forging and quenching industrial furnace display

Forging and quenching industrial furnace are widely used. The following is a multi-directional display diagram of Forging and quenching industrial furnace, and the details are full of quality and intelligence.。

Forging and quenching industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Working principle of Forging and quenching industrial furnace

Forging and quenching industrial furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Forging and quenching industrial furnace

5、Introduction of Forging and quenching industrial furnace characteristics

Forging and quenching industrial furnace has the following characteristics

1. Stable and reliable

The Forging and quenching industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Forging and quenching industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Forging and quenching industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Forging and quenching industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Forging and quenching industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Forging and quenching industrial furnace

6、Company selection

Choosing a suitable Forging and quenching industrial furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Forging and quenching industrial furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Forging and quenching industrial furnaceIt has the functions of Metal tempering, Improve production efficiency, Energy conservation and environmental protection, Metal tempering and Metal forging heating，widely used inmachinery,pharmacy,machinery,electron,Machinery manufacturing and other industries，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。